Park & Garden Lighting Poles
All of our products are hot-dip galvanized with a full protection technique against rusting. It varies according to the product and the lighting power options.
Corrosion-resistant aluminum arm is used. All bolts are stainless steel. Dust and liquid leaks are prevented with silicone gaskets. The skylight part consists of an aluminum spinning cap and a 25mm pmma glop. The glop is attached inside the hat using the original bottom. The luminaire can be rotated 360 degrees for orientation.
Street Lighting Poles
Decorative console lighting poles are produced as an alternative to standard flat console lighting poles in terms of architectural richness. One of the most preferred models is the polygonal cantilever type formed by bending the body of the pole, as it is one-way lighting. In the decorative pipe console, unlimited model alternatives can be created according to customer request.
Highways, avenues and streets, squares, parking lots, sites, gas stations etc. Galvanized polygonal lighting poles used in the lighting of the floors are produced from 3 meters to 1 meter height.
Projector Poles
Highways, intersections, parking lots, airports, city squares, sports fields, stadiums, open spaces, factories, stadiums, etc. Projector poles with galvanized polygonal lift, which are used for lighting the floors, are produced at the desired height according to customer demand.
Generally 14 mt. and higher poles, which are formed by the help of ladders mounted on the pole body of the projector basket at the top top and supported by the hoop sheets surrounding the outside of the ladder.
Projector Poles manufactured with portable ladder, Z ladder, protection ring, sleeper or platform; It can be produced as one-sided, two-sided or with a circular platform depending on the area to be used.
Tedaş Type Approved Poles
Lighting poles approved by the General Directorate of Tedaş must be used in street and street lighting. The main reason for this obligation is to aim to use controlled, accurate and standardized products in our country. According to the standards set by Tedaş General Directorate, the manufacturer company prepares and presents the static calculations of the product it designs in accordance with the geographical locations of the country.
The main purpose of Tedaş organization in requesting type project poles in the network transfer is that the static values of the poles used are controlled by their institution, they know that they do not carry any risk, and are designed and produced within the relevant international standards.
Benches and Trash Cans
Main Body Made of Stainless Steel or ST 37 Steel Sheet Seating and Backrest Timber Wooden Paint Over Impregnated Pine Wood Paint Aluminum Luminaire Tampered Glass Corrosion-resistant electrostatic powder paint The screws and parts used are stainless steel Aluminum injection sub-base Can be painted in desired colors
Other Poles
It is produced at the desired height according to customer demand. Static design is made according to “ASCE manual 72”.
Led Armatures & Projectors
Wall Mounted Fixtures can be used consecutively at the desired length. Led Wall Mounted Fixtures are projected in accordance with the building structure.